Hot Dip Galvanized Structures

Description

• Raw materials-JSW,
• Jindal HDG Steel-80 to 120 microns
• Yeild Strength-250 to 350mpa

Scope of Application:

Ground mounted & RCC roofs.

Wind Capacity:

upto 250 km/hr

Fastening type/ Roof Fixture:

Using J bolts with civil pedestal for RCC roofs. Piling and concreting for ground mounted installation.

Module Orientation

Landscape/Portrait

Requirements

Normal RCC rooftops with or without parapet wall. Suitable for all types of soils with load bearing capacity test.

Advantages

• Seasonal tilt or continuous tracking to obtain maximum efficiency.
• Fixed tilt for true south roofs.
• Engineering flexibility for car port and elevated structures. Special designs for coastal regions with wind speed. >200km/hr and galvanization not less than 120μm. High Corrosion resistance.
• Minimum micron used is 80μm.
• Elevation of 10 to 29 deg.
• STAAD analysis and design vetted by IIT, Chennai.

MINI 300

Description

• Length varying from 120mm to 5m and Height from 40mm to 100mm
• Profile Thickness of 2.5mm
• 6063 Aluminum T6 Grade.

Scope of Application:

Pitched roofs with Trapezoidal sheet metal or puff insulated sheet metal.

Wind Capacity:

150km/hr

Fastening type/Roof Fixture:

Rivets/self tapping metal screws / Adhesive solution over roofing sheets.

Module Orientation:

Landscape/Portrait

Requirements

• Sheet thickness: >0.5mm (steel or aluminum)
• Puff insulated sheet: Approval from manufacturer required

PreviousNext

• Crest width: >22mm
• Module frame height: 30-50mm

Advantages

• Innovative and statically optimized partial rail system that is quick and easy to mount.
• Universal module clamps are suitable for portrait and landscape orientation.
• Optimized for storage, transport and compatible with all PV module.
• Air gap of 70 to 130mm ensured for heat dissipation.
• Anodized for corrosion resistance.
• Suitable for any Trapezoidal roofing sheet crest width. Available with both Penetrating and Non Penetrating type.

Products

Structures

BALLAST 2000

Description

• Length of 1000mm and 2000mm
• Profile Thickness of 2.5mm
• 6063 Aluminum T6 Grade.

Scope of Application:

RCC roof or Pitched roofs with Trapezoidal sheet metal or puff insulated sheet metal

Wind Capacity:

170km/hr

Fastening type/ Roof Fixture:

Dead loads or Civil pedestals with Anchor fasteners over RCC roof, Rivets or self-tapping metal screws over Roofing Sheet

Module Orientation

Landscape/Portrait

Requirements

• Flat or Inclined RCC roof
• Sheet thickness: >0.5mm (steel or aluminum)
• Puff insulated sheet metal: Approval from manufacturer required
• Crest width: >22mm
• Module frame height: 30-50mm

Advantages

• Simple and easy installation.
• Suitable for RCC and Tin shed Roof.
• Suitable for kW to MW size projects.
• Cost effective for higher capacity projects.
• Elevation of 10 to 29 deg.
• Anodized for corrosion resistance.
• Suitable for metal shed roofs with non south slope to reverse tilt.
• Proven STAAD report will be provided for wind load analysis. Distributed weight of MMS over RCC roof or sheet metal roof is less when compared to HDG structure.

STRUT RAIL & DOUBLE C RAIL

Description

• Length varying from 1 to 5m with height of 40mm
• Profile Thickness of 2.35mm
• 6063 Aluminum T6 Grade.

Scope of Application:

Pitched roofs with Trapezoidal sheet metal or puff insulated sheet metal

Wind Capacity:

150km/hr

Fastening type/Roof Fixture:

Self tapping metal screws or Adhesive solution over roofing sheet

Module Orientation:

Landscape/Portrait

Requirements

• Sheet thickness: >0.5mm (steel or aluminum)
• Puff insulated sheet metal: Approval from manufacturer required

• Crest width: >22mm
• Module frame height: 30-50mm.

Advantages

• Simple and easy installation
• Available in Unistrut Channels, Plain Channels, Slotted Channels.
• Suitable for kW to MW size projects.
• Manufactured in Aluminum & Metal Sheet with hot dip galvanized.
• Anodized for corrosion resistance.
• Air gap of 70 to 130mm ensured.